Scanstrut SPH-4XI-W Helm Pod for 4 Instruments or 2 & a 7" Display

Scanstrut SPH-4XI-W Helm Pod for 4 Instruments or 2 & a 7" Display

Name: Scanstrut SPH-4XI-W Helm Pod for 4 Instruments or 2 & a 7" Display
SKU: 6-80645

Product code: 6-80645
Manufacturer SKU: SPH-4XI-W

Description

Scanstrut SPH-4XI-W ScanPod Helm Pod is designed for mounting up to 4 standard sized navigation instruments / autopilots or 2 instruments and a 7" display, right where you need them. The Helm Pod fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33") in diameter. This allows you to have your instruments in the prime position while out on your sailing boat.

Scanstrut Helm Pod SPH-4XI-W fits the following devices:

Instruments & Autopilots:

- B&G 10 / 10 HV, Triton & Triton²

- Furuno FI-50 STD Instruments, NAVpilot-300 & NAVpilot-711C

- Garmin GMI 10, GMI 20, GNX, GNX 20 & GNX 21

- Nexus NX, NX2 Digital & NX2 Analogue

- Northstar Explorer 310 Instruments

- Raymarine i70, p70, p70r, ST290 Analogue, ST60+, ST70 & T100 Series

- Simrad AP24, AP44, IS20, IS35 Digital Gauge, IS42 Digital Display, IS42J Digital Gauge, IS70 & IS80

- Tacktick Maxi Display T100 Series

- Universal helm fixing: Fits pedestal rails 25mm - 33.7mm (0.98" - 1.33") OD.

- Secure & watertight install: Saddle system supports the stainless tubing enabling a secure & rigid fit onto any pedestal & also ensures a watertight seal at cable entry.

- No drill fixing kit: Customised U-bolts fit around the rail & through the saddles into the back of the pod eliminating the need for time consuming & awkward drilling of the stainless rail.

- Hassle-free install & service: Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick & safe installation & repeat servicing.

- Increased protection: Pod seal is made from a high tear strength silicone, it has a very high resistance to heat & UV so you can have confidence that it won’t deteriorate over time.

- Supplied uncut: As standard you will receive your scanpod uncut. For a small charge Scanstrut offer a factory cutting service.

Specifications

Tilt	7°
Brand	Scanstrut
Cut Out	Maximum Instruments: 120mm x 102mm (4.7" x 4"), Maximum Display: 140.5mm x 230mm (5.5" x 9.1")
Width	Overall: 566mm (22.3"), Fits distance between mounting rails: 177.8mm to 304.8mm (7" - 12")
Diameter Description	For Pedestal Rail OD: 25mm to 33.7mm (0.98" - 1.33")
Dimensions	Maximum Usable Face Instruments: 135mm x 122mm (5.3" x 4.8"), Display: 158mm x 250mm (6.2" x 9.8")